Coda File System

Error running rdsinit

From: Pete Gonzalez <gonz_at_ratloop.com>
Date: Sun, 1 Aug 1999 18:13:52 -0400 (EDT)
I get the attached error when I run rdsinit.  Basically I'm trying to
install the CODA server on a 12GB drive, which apparently isn't a
"standard" configuration.  :-)

My partitions are laid out as follows:

	Disk /dev/hdb: 16 heads, 63 sectors, 25249 cylinders
	Units = cylinders of 1008 * 512 bytes

	   Device Boot    Start      End   Blocks   Id  System
	/dev/hdb1             1     1301   655672+  82  Linux swap
	/dev/hdb2          1302    24077 11479104   83  Linux native
	/dev/hdb3         24078    25118   524664   fd  Unknown
	/dev/hdb4         25119    25249    66024   fe  Unknown

Partition hdb2 is /vicepa, hdb3 is the RVM metadata parition (logically
only 500MB), and hdb4 is the RVM log partition (logically only 30MB).  I
extrapolated the parameters below from the vice-setup-rvm script.

Any help would be very appreciated!

-Pete

--------
The following parameters are chosen:
   length of data segment: 0x1f400000 ( 524288000)
  starting address of rvm: 0x20000000 ( 536870912)
                 heap len: 0x1e000000 ( 503316480)
               static len:   0x100000 (   1048576)
                   nlists:       0x64 (       100)
               chunk size:       0x20 (        32)
Do you agree with these parameters ? (y|n|q) y
Going to initialize data file to zero, could take awhile.
done.
?  ERROR: rds_zap_heap RVM_EINTERNAL.
Received on 1999-08-01 18:11:21