(Illustration by Gaich Muramatsu)
I'm new to CODA and am trying to get the client working under Redhat 6.0. After doing # venus-setup testserver.coda.cs.cmu.edu 10000 and # venus & the startup begins ok, but gets stuck at the following point: 14:38:46 Getting Root Volume information... 14:39:01 GetRootVolume: can't get root volume name! 14:39:31 GetRootVolume: can't get root volume name! I'm guessing that there may be a version problem with the pieces I am using. Here is what I've got: Redhat 6.0 (Intel) kernel 2.2.5-22 coda-debug-client-5.2.7-1.i386.rpm Coda kernel module built using linux-coda-5.2.0.tgz When building the kernel module I had to do a "ln -s linux2.2 linux2.2.5" so it would compile in the right sub-directory. Otherwise everything installed out-of-the-box. I though it might be problematic to build the kernel module using linux-coda-5.2.0.tgz when the rest of my client is from 5.2.7-1, so I tried installing the client from coda-debug-client-5.2.0-1.i386.rpm, but that produced the same results. Do I need to upgrade my system to a 2.2.7 or 2.2.9 kernel, or might the problem be something else? Thanks for any suggestions, -Alan : Alan W. Kelm akelm_at_cms.math.ca : : Canadian Mathematical Society - Executive Office : : Site Manager - "Camel" East (613) 562-5800 ext. 3527 :Received on 1999-08-04 15:16:22