(Illustration by Gaich Muramatsu)
Hi All I am working through the HowTo: I got to here : venus-setup <comma_separated_host_list> <cache_size_in_kb> venus-setup and venus (below) are in /usr/sbin. Make sure that /usr/sbin is in your path or that you use fully qualified pathnames. We strongly recommend that you initially try testserver.coda.cs.cmu.edu as the comma_separated_host_list first, and keep the cache size to 20000. NOTE: venus-setup will edit /etc/services to make sure some additional services are registered. The following assumes you are running X-Windows. However, you could run these commands from virtual consoles as well, by omitting the xterm -e in front of the commands below. Start Venus with: venus & so i did : [root_at_lxcontrol001 /]# venus-setup testserver.coda.cs.cmu.edu 20480 /etc/services already has new services registered! Good. /etc/services ready for Coda [root_at_lxcontrol001 /]# venus Date: Thu 09/19/2002 16:45:38 /usr/coda/LOG size is 560717 bytes 16:45:38 /usr/coda/DATA size is 2242868 bytes 16:45:38 Initializing RVM data... 16:45:38 Fatal Signal (11); pid 15078 becoming a zombie... 16:45:38 You may use gdb to attach to 15078 I have been looking around , using the list , google and a few other things to no avail . I am using the following software versions : rwxr-xr-x 1 root root 1342652 Sep 19 12:03 coda-5.3.19.tar.gz -rwxr-xr-x 1 root root 31332 Sep 19 15:15 lwp-1.8-1.i386.rpm -rwxr-xr-x 1 root root 37349 Sep 19 15:15 lwp-devel-1.8-1.i386.rpm -rwxr-xr-x 1 root root 286017 Sep 19 15:15 rpc2-1.13-1.i386.rpm -rwxr-xr-x 1 root root 508442 Sep 19 15:25 rpc2-devel-1.13-1.i386.rpm -rwxr-xr-x 1 root root 291899 Sep 19 15:15 rvm-1.6-1.i386.rpm -rwxr-xr-x 1 root root 452362 Sep 19 15:24 rvm-devel-1.6-1.i386.rpm -rwxr-xr-x 1 root root 69349 Sep 19 15:15 rvm-tools-1.6-1.i386.rpm Can any one tell me what I have missed ? NeilReceived on 2002-09-19 10:47:39